Loading...
Loading...
ADU Plans in Richmond Hill, Ontario: design, permit and build on a single contract. A typical 700 sq ft unit estimates at $16,500-$33,500 (about $396/sq ft), with $9,000-$15,000 including York Region charges in municipal approvals and a April-November construction season.

Architectural drafting and permit-ready ADU plans - site plan, floor plans, elevations, sections and the structural details a municipality needs to issue a permit.
Service area
Richmond Hill, Ontario
York Region
Typical build estimate
$16,500-$33,500
about $396/sq ft in Richmond Hill
Municipal approvals
$9,000-$15,000 including York Region charges
quoted separately from the build
Build season
April-November
139 cm snow · -4.6°C winter avg
Frost depth
1.2 m
footing depth, OBC Part 9
Local market
202,022
residents · walkability 47/100
The Oak Ridges Moraine Conservation Plan covers Richmond Hill's northern third, and on those Jefferson and Oak Ridges lots the tree-protection and grading requirements routinely cost more than the ADU's foundation. We price a moraine site and a Crosby site as two different classes of project. Richmond Hill permits additional dwelling units subject to Oak Ridges Moraine Conservation Plan constraints on the northern third of the town.
Sloped and treed lots along the moraine where site grading and tree protection drive cost more than the building itself. Richmond Hill sees 139 cm of snow and -4.6°C winter averages. Ontario's 1.2 m frost-depth requirement governs every footing we pour for adu plans, and the April-November season sets the excavation window.
Plans are only useful if they are permit-ready for the authority that will actually review them, so an Richmond Hill set is drawn to York Region submission standards rather than to a generic template. The set covers site plan, floor plans, elevations, sections, the 1.2 m foundation detail, the roof framing sized for 139 cm of snow, and the fire-separation and egress details the plans examiner checks first. Stock plans bought online almost always fail the Richmond Hill review on setbacks and lot coverage, because those are parcel-specific and no catalogue drawing can know your lot.
Everything you need to know about our services.
A typical 700 sq ft build in Richmond Hill estimates at $16,500-$33,500 - about $396/sq ft, set by $9,000-$15,000 including York Region charges in approvals, a 1.2 m frost-depth footing requirement and 139 cm of annual snow load. Final pricing follows the site visit.
Related service: Accessory Dwelling Units
Richmond Hill permits additional dwelling units subject to Oak Ridges Moraine Conservation Plan constraints on the northern third of the town. Approval costs in Richmond Hill run $9,000-$15,000 including York Region charges, quoted separately from construction so the permit stage holds no surprises.
Related service: Accessory Dwelling Units
Sloped and treed lots along the moraine where site grading and tree protection drive cost more than the building itself. At 47/100 walkability, Richmond Hill suites usually keep one parking space: enough to clear the zoning review without surrendering the whole yard. We work regularly in Oak Ridges, Bayview Hill, Mill Pond.
Related service: Accessory Dwelling Units
You can, but they will not clear the Richmond Hill plans examination unmodified: setbacks, lot coverage, soft-landscaping and the angular plane are parcel-specific, and a catalogue drawing cannot know your parcel. Most stock plans end up redrawn at the applicant's cost after the first review comments.
Related service: Accessory Dwelling Units
Get a free, no-obligation quote from GTA ADU Builders - zoning review, permit drawings and construction for ADUs across the GTA.